Product Features (ROLLING MILL REDUCER)

• Introduction of advanced technologies such as AGMA 2001-B88 and Design & Drawing using ACAD r12 ~ r14

• Precision tooth grinding (JIS 1 Grade, Tip Relife, Pinion Crowning) of internal parts (Pinion & Gear)

• After tooth grinding, precise inspection of Involute Profile, Lead, Pitch, Runout, etc. is performed on the Gear Testing M/C to maintain accurate Gear Contact.

• Cooling Oil is supplied separately to provide proper lubrication and temperature rise control to gears and bearings.

• Easy to check internal condition when opening the case by attaching an inspection window

• Shaft Cr-Plating and Double Seal Use to Prevent Oil Leakage and Install Grease Inlet

reference

• Model Name : DTP-98001

• Points to consider when purchasing : Select by considering transmission power, input/output rotation speed, reduction ratio, daily operating hours, type of driven machine, etc.

• Purchase inquiries : Sales Manager
  (Tel:+82-32-812-8401~7 Fax: +82-32-812-8409)

Product Specifications

• 700kW ×350~700rpm × 1/3.793, 1/2.742 (Twin Drive)

• Steel lubrication method for bearing and gear parts

• Control internal temperature by attaching a cooling unit and temperature controller

• Parts Material: Gear-SCM415, Pinion-SCM415, Shaft-SCM440

• Heat Treatment: Carburizing(Hrc-60)

Product Features (ENTRY & EXIT LOOPER CAR DRIVE REDUCER)

• Introduction of advanced technologies such as AGMA 2001-B88 and Design & Drawing using ACAD r12 ~ r14

• Precision tooth grinding (JIS 1 Grade, Tip Relife, Pinion Crowing) of internal parts (Pinion & Gear)

• After tooth grinding, precise inspection of Involute Profile, Lead, Pitch, Runout, etc. is performed on the Gear Testing M/C to maintain accurate Gear Contact.

• Cooling Oil is supplied separately to provide proper lubrication and temperature rise control to gears and bearings.

• Easy to check internal condition without opening the case by attaching an inspection window

• Use of sHAFT Cr-Plating and Double Seal to prevent oil leakage and installation of Grease Inlet

reference

• Model Name : DTP-98002

• Points to consider when purchasing : Select by considering transmission power, input/output rotation speed, reduction ratio, daily operating hours, type of driven machine, etc.

• Purchase inquiries : Sales Manager
  (Tel:+82-32-812-8401~7 Fax: +82-32-812-8409)

Product Specifications

• 110kW ×1150rpm ×1/108.1

• Steel lubrication method for bearing and gear parts

• Internal temperature control with cooling unit and temperature sensor attachment

• Parts Material: Gear-SCM415, Pinion-SCM415, Shaft-SCM440

• Heat Treatment: Carburizing(Hrc-60

Product Features (CHARGING TEEMING CRANE HOIST REDUCER)

• Introduction of advanced technologies such as AGMA 2001-B88 and Design & Drawing using ACAD r12 ~ r14

• Precision tooth grinding (JIS 1 Grade, Tip Relife, Pinion Crowing) of internal parts (Pinion & Gear)

• After tooth grinding, precise inspection of Involute profile, Lead, Pitch, Runout, etc. is performed on the Gear Testing M/C to maintain accurate Gear Contact.

• Cooling Oil is supplied separately to provide proper lubrication and temperature rise control to gears and bearings.

• Easy to check internal condition without opening the case by attaching an inspection window

• Shaft Cr-Plating and Double Seal Use to Prevent Oil Leakage and Install Grease Inlet

reference

• Model Name : DTP-98003

• Points to consider when purchasing : Select by considering transmission power, input/output rotation speed, reduction ratio, daily operating hours, type of driven machine, etc.

• Purchase inquiries : Sales Manager
  (Tel:+82-32-812-8401~7 Fax: +82-32-812-8409)

Product Specifications

• 2 ×200kW ×10p ×1/44.3(Twin Drive)

• Steel lubrication method for bearing and gear parts

• Internal temperature control with cooling unit and temperature sensor attachment

• Parts Material: Gear-SCM415, pinion-SCM415, Shaft-S45C

• Heat Treatment: Carburizing(Hrc-60)